DIMENSIONAL MEASUREMENT LABORATORY CALIBRATION / TEST LIST

ANGLE MEASUREMENTS LABORATORY CALIBRATION / TEST LIST

CODE NAME NOTE
G2BC-1100  Autocollimator  1, 3 
G2BC-1200  Electronic Level (per couple)  1 
G2BC-1600  Clinometer  1 
G2BC-2100  Angular Gauge Blocks (per piece)  1, 2, 3 
G2BC-2200  True Square  1 
G2BC-2300  Optical Polygon (price for each measuring surface)  1 
G2BC-2500  Index Table (with 30° increments)  1, 4 
G2BC-3000  Adjustable Reference Mirror with one face  1 
G2BC-3100  Adjustable Reference Mirror with double face  1 
G2BC-3200  Magnetic Back Mirror  1 
G2BC-3300  Rotary Table  1, 3 
G2BC-3400  Small Angle Generator   
G2BC-9900  Special Calibration / Test  3 
(1) Accredited Item. 
(2) Valid for 90° Angle gauge blocks in form of True Square 
(3) Price quoted will be determined acc. to request. Prices differ depending on the service. Given price is the lowest calibration price 
(4)  
()  


GAUGE BLOCKS AND INTERFERENTIAL LENGTH MEASUREMENTS CALIBRATION / TEST LIST

CODE NAME NOTE
G2BM-1100  Short Gauge Blocks: Grade 00, K Rectangular or Square Shape (measurement by interferometry)  1,2 
G2BM-1300  Short Gauge Blocks: Grade K,0,1,2 Rectangular or Square Shape (measurement by comparison)  1,2 
G2BM-1600  Long Gauge Blocks: Rectangular or Square Shape (length between 125-1000 mm)(measurement by comparison or measurement by mechanical probing)  1,2 
G2BM-1800  Special Gauge Sets for Calibration of Mechanical Comparator  1 
G2BM-4000  Optical Flat (Prices differ acc.to dimensions)  1,2,3 
G2BM-4100  Optical Parallel  1,2 
G2BM-4200  Optical Flat (with 3-Flat Method by interferometry)  1,2 
G2BM-4300  Mirror / Platen / Optical Surface Flatness Measurements (Max. Diameter 150 mm)  1,2 
G2BM-4400  PZT- Nanosensor  1 
G2BM-9100  Angular Interferometer and Angle Reflector  1, 3 
G2BM-9200  Penta Prism (Optical Square)  1 
G2BM-9300  Corner Cube (Retro Reflector)  1 
G2BM-9900  Special Calibration / Test  3 
(1) Acredited Item. 
(2) Prices are given per piece 
(3) Price of optic flat diameter ; d < 100 mm is 550 TL+KDV, 100 mm < d < 150mm is 1210 TL+KDV and d > 150 mm is 2300 TL+KDV. 


GEOMETRICAL STANDARTS AND FORM MEASUREMENTS LABORATORY CALIBRATION / TEST LIST

CODE NAME NOTE
G2BF-0100  Roundness Standards  1, 3, 4 
G2BF-0110  Magnification Standard (Flick)  1 
G2BF-0200  Reference Ring-Plug Gauge, Spherical Standard (for CMM) (for Set-up purposes), calibration with length measuring machine (price per piece)  1 
G2BF-0210  Spherical Standard for Optical Projectors (calibration with length measuring machine)  1 
G2BF-0300  Plain Go-NoGo Ring-Plug Gauge (calibration with length measuring machine)  1 
G2BF-0400  Parallel Thread Ring-Plug Gauge (calibration with length measuring machine)  1 
G2BF-0410  Thread Measuring Probes (double sided spherical probe)  1,3 
G2BF-0500  Thread Measuring Pins (3 pieces)  1 
G2BF-0510  Gear Measuring Pins (2 pieces)  1 
G2BF-0520  Pin Gauge (1 pieces)  1 
G2BF-1200  Electronic Displacement Transducers (1-D Displacement Transducers, actuators)  1 
G2BF-1210  Electronic Displacement Transducers (1-D Displacements Transducers, actuators) (calibration with Nano sensor, ± 7µm range)  1 
G2BF-1510  Dial-Indicator Tester (Resolution #?## 0.1micrometer)  1, 3 
G2BF-2000  Steel Tape (surveyor levelling rod, engineer tape, engineer scale, PI tape, geodetic wire) and Steel Rule (Up to 10m for 10 measurement points)  1,2 
G2BF-2020  Precision Line Scale (Glass Rule for Microscope and optical projectors) calibration with Optical Projector for 10 measurement points  1,2 
G2BF-2021  Precision Line Scale (Glass Rule for Microscope and optical projectors) calibration with optical projector equipped with laser Interferometer for10 measurement points  1,2 
G2BF-2030  Stage Micrometer (calibration with Mask Measuring Machine equipped with Differential Interferometer for10 measurement points.)  1,2 
G2BF-9900  Special Calibration / Test  3 
(1) Acredited Item. 
(2) When measurements with more than 10 points are requested, 35 TL for each measuring point must be added to the price. The price is for the measurements of one face and one side of one scale on the ruler. 
(3) Price quoted will be determined acc. to request. Prices differ depending on the service. Given price is the lowest calibration price 
(4)  


SURFACE TEXTURE AND NANOMETROLOGY LABORATORY CALIBRATION / TEST LIST

CODE NAME NOTE
G2BY-0100  Roughness Standard  1,2 
G2BY-0110  Depth Setting Standard  1 
G2BY-9900  Special Calibration / Test  3 
(1) Acredited Item. 
(2) Measurements are performed for one Cut-Off value. If more than one Cut-Off measurements are requested, 260 TLs for each Cut-Off value must be added to the price. 
(3) Price quoted will be determined acc. to request. Prices differ depending on the service. 


TOPOGRAPHIC AND INDUSTRIAL MEASUREMENTS CALIBRATION / TEST LIST

CODE NAME NOTE
G2BT-0100  Theodolite  1 
G2BT-0200  Optical Level  1,2 
G2BT-9900  Special Calibration / Test  3 
(1) Acredited Item. 
(2) If optical level has optical micrometer, price of each micrometer is 200 TL. 
(3) Price quoted will be determined acc. to request. Prices differ depending on the service. 


3-DIMENSION MEASUREMENTS (CO-ORDINATE METROLOGY) CALIBRATION / TEST LIST

CODE NAME NOTE
G2BU-0100  Cylindrical Square (Roundness, Squareness, Straightness and Parallelism Measurements)  1 
G2BU-0110  Granite or Steel Square (Squareness Standard)  1,2 
G2BU-0200  Height Gauge  1 
G2BU-0210  Check Gauge (Calliper Checker)  1,3 
G2BU-0220  Riser Block  1 
G2BU-0400  Tapered Ring-Plug Gauges (calibration with CMM)  1 
G2BU-0410  Tapered Thread Ring-Plug Gauge (calibration with CMM)  1 
G2BU-0500  Plain Go-NoGo Ring-Plug Gauge (calibration with CMM) (for at least 10 pieces)  1 
G2BU-0510  Parallel Thread Go-NoGo Ring-Plug Gauge (calibration with CMM) (for at least 10 pieces)  1 
G2BU-0520  Snap Gauge Calibration (calibration with CMM) (for at least 10 pieces)  1 
G2BU-2100  Pin Gauge (Gauges for Aircraft Engines)  4 
G2BU-9900  Special Calibration / Test  2 
(1) Acredited Item. 
(2) Prices differ acc. to workpiece dimensions and number of measurement points. 
(3) The price of the check gauges longer than 600mm are re-evaluated 
(4) Price is calculated with the formula (2330+n*165) where n: Number of pins