CODE |
NAME |
NOTE |
G1YG-1050 |
DC High Voltage Measuring System Calibration (100 kV - 400 kV) |
1, 2, 3, 7,11 |
G1YG-1250 |
DC High Voltage Measuring System/Probe Calibration (1 kV - 100 kV) |
1, 2, 3, 7, 11 |
G1YG-2050 |
AC High Voltage Measuring System Calibration (45 Hz-60 Hz, 101 kV - 400 kV) |
1, 2, 3, 9, 11 |
G1YG-2555 |
Calibration of High Frequency High Voltage Measuring System (50 Hz-300 Hz, 1 kV-200 kV) |
2, 3, 9, 11 |
G1YG-2655 |
Calibration of VLF (Very Low Frequency) AC High Voltage Device (1 kV-120 kV) |
2, 3, 9, 11 |
G1YG-2800 |
Calibration of AC High Voltage Measuring System (45 Hz-60 Hz, 1 kV - 100 kV) |
1, 2, 3, 9 |
G1YG-3050 |
Lightning Impulse High Voltage Measuring System Calibration (40kV - 1000kV) |
1, 2, 3, 11 |
G1YG-3100 |
Switching Impulse High Voltage Measuring System Calibration (40kV - 850kV) |
1, 2, 3, 11 |
G1YG-3200 |
Impulse High Voltage Measuring System/Probe Calibration (<40 kV) |
1, 2, 3, 11 |
G1YG-3250 |
Impulse High Voltage Source Calibration (1 kV - 40 kV) (Includes volatge and current option) |
1, 2, 3, 11 |
G1YG-3260 |
Calibration of Impulse High Current Shunt/Probe |
2, 3, 11 |
G1YG-4400 |
PD Detector Calibration (>2 pC) |
1, 2, 3, 11 |
G1YG-4450 |
PD Calibrator Calibration |
1, 2, 3, 11 |
G1YG-4451 |
Surge Device Calibration |
2, 3, 11 |
G1YG-4452 |
Electrostatic Field Meter Calibration |
2, 3, 11 |
G1YG-5060 |
Calibration of Capacitance and Dissipation Factor Measuring Device |
1, 2, 3, 4, 11 |
G1YG-5070 |
Calibration of Standard Capacitor |
1, 2, 3, 4, 11 |
G1YG-6000 |
Calibration of Oil Tester |
1, 2, 3, 11 |
G1YG-6025 |
Insulation Tester Calibration (up to 10 kV, Meger etc.) |
1, 2, 3, 7, 8, 11 |
G1YG-6050 |
Calibration of High Voltage Field Meter |
1, 2, 3, 11 |
G1YG-9900 |
Special High Voltage Test/Measurements |
2, 3, 5, 6, 10 |
(1) |
All our activities are peformed according to IEC 60060-2 standard. |
(2) |
The calibrations have been priced for five measuring points at least. For the each additional measuring point, 10% of extra charge will be added to the calibration fee. |
(3) |
Customer is responsible to supply the uninterrupted source for on-site calibration according to the IEC 60060-1 and IEC 60060-2. No any repay in the case of problem about breakdown, out of system etc. |
(4) |
C/tand measurement and calibrations performed in the TÜBİTAK UME High Voltage Laboratory under (50 Hz) AC high voltage and up to 400 kV. On site C/tand measurement and calibrations performed maximum up to 10kV.. |
(5) |
Opening hours are 08:00 to 12:00 and 13:00 to 16:30. |
(6) |
Pricing is based on demand. |
(7) |
Calibration cost for one polarty.For double polarty %50 calibration cost is added. |
(8) |
|
(9) |
Our accreditation scope can be reached from TÜRKAK web site (www.turkak.org.tr). |
(10) |
|
(11) |
|